File Size: 85.4 MB

updated version of Simplify3D is a special program designed to prepare models for 3D printing, with great functionality to get the best print quality.

No longer need to have many applications for various tasks.
With Simplify3D you can import and export models, cut, slice, and send to print in minutes. The program is suitable for most 3D-printers.

Simplify3D has a huge number of settings for every taste, and also has the ability to print from a USB flash drive or SD card. Slice your models in seconds, not even minutes.
Simplify3D is the fastest Slicer on the market, allowing you to easily and quickly perform a large number of iterations to get the best result.

Creating supports has become even easier. The program automatically creates support based on the corners, and also allows you to add or delete them as needed.

Customize the layout, dimensions and angles for your supports. Remove support without damaging the part. Create great two-tone models with the Simplify 3Ds Dual Extrusion wizard.
The program allows you to make clear color transitions, and create high-quality details and color gamut. download скачать multi-part models.

Easily manipulate and print them, allowing you to save time and increase efficiency.
Choose print mode layered or sequential. Change the parameters such as layer thickness, temperature, size for each part. Stop wasting time and money on unsuccessfully printed objects.

A very detailed animated preview mode allows you to visualize every aspect of the model before sending it to print. The achievement of high quality is also due to the large number of print settings.
The program has a function of preliminary calculation of time, amount of materials required for printing, as well as cost.

Details:
Year of release:2018
Version:4.1.0
Address of. Site:Simplify
Language:English, German and others.
Treatment:file replacement
1. Rename the original "Interface.dll" file to "Interface.dl1".
2. Copy "Interface.dll" from the distribution to the folder with the installed program.

System requirements:
CPU:Intel Pentium 4 processor and higher,
RAM:2GB of RAM and more.
OS:Windows XP and above (recommendations from the manufacturer's website). Mandatory support for OpenGL 1.2+, otherwise the program will not work. It is recommended to have a connected 3D printer with a compatible firmware, but you can do without it (upload g-codes to a file).

WHATS NEW:
4.1.0 the Version:

-Prime Pillar and Ooze Shield have been upgraded to fully support up to 6 separate extruders
-New Prime Pillar and Ooze Shield construction provides better stability, improved bonding between layers, and reduced material contamination
-Improved priming sequences ensure that a tool is always primed at the beginning of each layer during multi-extrusion prints
-Print time estimates have been greatly improved by simulating the actual behavior of the printer firmware for increased accuracy
-New intelligent bridging algorithms utilize the model topology to automatically select the best bridging toolpaths
-Bridging toolpaths will now be added, even when using concentric external fill patterns
-Improved bridging behavior when dealing with multiple overlapping models
-Sequential printing can now be used with multi-extrusion prints, allowing you to print multiple dual extrusion groups on a single build platform with reduced stringing between parts
-When printing multiple parts, the raft for each model is now printed sequentially with its corresponding part for improved adhesion
-Improved ability to use define separate Additions settings (rafts, skirts, etc) for nearby parts on the print bed
-Solid layer regions have been optimized so that they are only added when absolutely needed
-New solid layer toolpaths improve bonding between perimeters on the layers above and below, creating stronger parts in the Z-direction
-Movement sequences have been further improved to avoid knocking over small parts when changing layers
-Faster preheat times for multi-extruder builds
-Fan and temperature per-layer setpoints now work more intuitively in conjunction with the Variable Settings Wizard
-The layer number that is displayed during Preview Mode has been updated so that it is more intuitive for multi-process prints
-Feature type comments in the G-Code file have been updated with a new prefix for easier searching and parsing
-Using a first layer height below 100% will now correctly reduce the amount of extruded material (alternatively, a negative global Z-axis offset can be used to lower the first layer while still extruding the same amount of material)
-Drag-and-drop can now be used to load a new G-Code toolpath preview while already in Preview Mode
-Improved interface usability for machines with extremely large build volumes
-Added support for a wider range of OBJ files
-Improved slicing for degenerate models, allowing these common mesh issues to be automatically healed by the software
-Numerous improvements for processing extremely large or complex build files
-The custom post-processing scripting engine available in the software has been optimized for faster execution times
-BFB toolpath formats have been significantly improved for quicker exporting
-Numerous performance and memory usage improvements
-New Portuguese language translation available by going to Help > Change Language
-Improved translation consistency for French, German, Italian, Japanese, and Spanish translations
-Software installers now include complete language translations, allowing you to select your preferred language during setup for improved accessibility
-Mac installer has been updated to be full 64-bit to avoid any potential warnings during installation
-Fixed a bug that was causing slow wipe speeds in certain situations
-Skirt and ooze shield toolpaths have been improved to remove extremely short movements
-Resolved an issue that had impacted FFF settings import from previously exported G-Code files
-Over 100 additional bug fixes across many different parts of the application for issues identified by our community
-Added support for over 50 new 3D printers including the Alfawise U20, Anycubic Chiron, Creality Ender 3 Pro, Creality CR-X, FlashForge Adventurer 3, FlashForge Guider II, FlashForge Inventor II, Geeetech A10, Geeetech A30, PowerSpec Ultra 2.0, Qidi Technology X-pro, TEVO Flash, Ultimaker S5, and many more

HOMEPAGE

https://www.simplify3d.com/

download скачать From UploadGig

https://uploadgig.com/file/download скачать/7c1c3a145a7c58Fc/BaDshaH_Simplify3D.4.1.0.rar

download скачать From Rapidgator

https://rapidgator.net/file/b7b8d1336a750659a58992320668ab44/BaDshaH_Simplify3D.4.1.0.rar.html