Geometric DFMPro 7.0.0.7586 for NX Series | 271.9 mb
The Geometric development team is pleased to announce the availability of of DFMPro 7.0 for NX series. This software facilitates upstream manufacturability validation by identifying those areas of a design that are difficult, expensive, or impossible to manufacture and automates the iterative design review process for manufacturability issues.

        Supported NX Versions

- NX 1847 Series
- NX 1872 Series
- NX 1899 Series

Important Note:

- From DFMPro for NX 7.0 version, we have implemented the following changes:
. Support for the NX 1899 Series.
. Discontinued the support for the NX 9.0 and NX 10 versions.
. DFMPro License Server upgraded to a 64-bit application. The previous versions of DFMPro License Server was a 32-bit application.
- Add-ons on the DFMPro for NX -Cost and DFX Analytics are additional licensedcomponents that are not included with the standard DFMPro for NX version.

Added New Rules

Additive Manufacturing Module

Recommended Angular Tolerance
A designer should specify the allowable angular tolerance value, which can easilyachieve. The tight tolerance value will add extra cost and increase the operationaltime.

General

Recommended Dimensioning Method
A designer should specify PMI with correct references. Designers often tend to definethe PMI as a graphical representation point of view, which can only be read by thehuman eye. However, these  representations  cannot  be  consumed  by  machines  or  softwarebecause  of  inaccurate specification of references. If the designer specifies thePMI with correct references ,   then   it  can   be  consumed  by   machines  andsoftware.  Semantic   PMI  will  use  for manufacturing   automation   like   Computer-AidedManufacturing   (CAM)   and   Coordinate Measuring Machines (CMMs).

Sand Casting Module

Draft Angle based on Height
Draft  angle  design  is  an  essential  factor  when  designing  the  Sand  casting  parts.In  the  Sand Casting  process,  the  draft  provides  the  part  for  pattern  design.  An  appropriatedraft  angle ensures the removal of the pattern without damaging the mold. No draftor undercuts can make with additional cores, which will add an extra cost.

The amount of draft angle will depend on the method of molding, drawing of the pattern,the material used as a pattern.   

Design for manufacturability (DFM),       sometimes also known as design for manufacture, is a perfectly straightforward idea: Products should be designed so that they can be manufactured. Moreover, they should be designed so that they are as easy and inexpensive to manufacture as possible. For machined parts,  for example, you need to be concerned with the material, with tool accessibility, and with the depth and shape of cavities and holes. Injection-molded parts need to slip easily out of their molds.

For anything other than the simplest parts and products, DFM can involve volumes of rules that can be hard to remember and time-consuming to check. Design reviews consume the time of experts. If a part fails design review, it heads back to the designer to be redesigned. This rework is expensive in terms of both time and money.

Enter DFM software such as DFMPro from Geometric Global. DFMPro is a DFM tool that runs within your CAD software: Creo Parametric (formerly Pro/ENGINEER), Dassault Systemes SolidWorks, Siemens NX and NX series.

DFMPro acts something like a spell checker for your CAD designs, providing quick checking of copious design rules to improve the manufacturability of parts and assemblies, and to reduce their manufacturing cost. It comes out of the box with more than 100 configurable rules-pulled from various handbooks, guidelines and DFM experts. You can customize the application to add more.

DFMPro automatically recognizes key features from your CAD designs. You don't have to tell it where the ribs and bosses are; it will locate them on its own.

Run DFMPro and, after a few seconds or minutes, it returns a hierarchical, interactive list of your problem areas. You can see at a glance how many rules your design breaks,  what those rules are, and where each instance of the problem is. You'll also get a list of all the rules your design passed, as well as those rules that don't apply to this design.

Click on a broken rule, and all instances of the problem are highlighted on your CAD model. Click on a problem, and you'll zoom in on that feature and receive a description of the issue.

The descriptions go way beyond "FAILURE: RULE 27." They give the design engineer actual useful information such as, "There is no fillet at the base of the boss,  whereas it is recommended to have a fillet 0.25 times the nominal wall thickness of the part."

DFMPro will even explain the rules. It will tell you, for example, not just that your cavity doesn't have the minimum draft angle, but what draft angles are and why they are important, complete with illustrated examples and recommendations. This should actually help new design engineers to understand and implement proper design practices.

DFMPro For NX Overview

HCL Technologies     is a next-generation global technology company that helps enterprises reimagine their businesses for                                                                                                                                                                                                                                                 the digital age. Our technology products, services and engineering are built on four decades of innovation, with a world-renowned management philosophy, a strong culture of invention and risk-taking, and a relentless focus on customer relationships.

Product: Geometric DFMPro
Version: 7.0.0.7586
Supported Architectures: x64
Website Home Page : 

https://dfmpro.geometricglobal.com]https://dfmpro.geometricglobal.com

Language: english
System Requirements: PC *
Supported Operating Systems: *
Software Prerequisites: *
Size: 271.9 mb

        Before installing DFMPro for NX, ensurethat the following system requirements fulfilled

Supported NX Version

- NX 1847 Series
- NX 1872 Series
- NX 1899 Series

Supported Microsoft Windows Operating Systems

- 64‐bit version of Windows 10 (Home editions are not supported)
- 64‐bit version of Windows 8.1 (Home editions are not supported)
- 64‐bit version of Windows 7 SP1 or higher(Home editions are not supported)

Recommended RAM
- Recommended   8 GB or more (Minimum: 4 GB)
DiskSpace
- Minimum: 4 GB   

download скачать link:

https://rapidgator.net/file/f925bb0cbd68540e643524aecb5fb45f/3hl6v.Geometric.DFMPro.7.0.0.7586.for.NX.Series.rar.html


https://nitroflare.com/view/27308B020A02B6F/3hl6v.Geometric.DFMPro.7.0.0.7586.for.NX.Series.rar


https://uploadgig.com/file/download скачать/6D4f1ac49730410C/3hl6v.Geometric.DFMPro.7.0.0.7586.for.NX.Series.rar

Links are Interchangeable - No Password - Single Extraction