https://abload.de/img/gew86lmzqjkr9vkqjsxuae9fw7.jpg

Complete Autocad 2D&3D Basic+Advanced Level Course-2016-2022
Last updated 5/2022
MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz
Language: English | Size: 15.43 GB | Duration: 31h 12m

A Complete AutoCAD 2D&3D Course From Beginners To Expert

What you'll learn
To learn all basic and advanced AutoCAD 2D&3D toolbars
To learn advanced Blocks and Dynamic Block
To learn Basic Sketch Practice, Floor Plan & House Elevation drawing,
To learn Circuit Diagram drawing
To learn Steel Structure and Mechanical drawing
To Prepare for AutoCAD Interview and Exams
To Create Drawing Sheet, BOM and Layout usage
To learn Sheet set Manager and Xref Features
To learn Annotative Features
To learn Pressure vessel and Oil & Gas industrial drawing

Requirements
Basic Knowledge of Engineering
Laptop / Computer (With AutoCAD 2022 Version)

Description
AutoCAD one of the most powerful design and drafting software. All the engineering professionals must to learn this software. This course will make you better professional AutoCAD Designer or Engineer. All the Tools and command clearly explained and practically made for all level students.Architects, Steel Structural Engineers, Mechanical Engineers, Electrical and Electronic Engineers and Civil Engineers this course will helps you to improve your design and drafting knowledge in professional wayWell planned training and clear explanation of AutoCAD toolsThis course will teach you all the basic and advanced feature of AutoCAD 2D&3DThis course will teach you to create accurate dimensional objectsThis course will teach you layers functions and its managementThis course will teach you various status bar actionsThis course will teach you Quick tools operationsThis course will teach you better understanding of model space and layout spaceThis course will teach you to create drawing sheets with using attributes and fieldsThis course will teach you to create blocks and advanced level dynamic blocksThis course will teach you to work with parametric features using Geometric and dimensional constraintsThis course will teach you to create sheet set manager and advanced features of view port controlThis course will teach you to work with external referencesThis course will teach you to create Annotative objects and its usesThis course will teach you how to use express toolPractice drawing and quizzes at the end of every sectionAdvanced practice and projects in end of this courseAfter this course you will get knowledge to handle Any AutoCAD related jobsDon't wait, Let's Start your good Steps your lifeBest of Luck

Overview

Section 1: Let's Start Autocad Introduction

Lecture 1 Introduction

Lecture 2 User Interface

Lecture 3 Workspace Switching

Lecture 4 How to Set AutoCAD Classic Toolbar

Lecture 5 Start New Drawing

Lecture 6 Units

Lecture 7 Limits

Lecture 8 Create your own template

Lecture 9 Open Existing Drawing

Lecture 10 How to Use Keyboard and Mouse In AutoCAD

Lecture 11 Navigation Toolbar

Lecture 12 Select Objects in Drawing

Lecture 13 Status Bar Introduction

Lecture 14 Practice Drawing

Section 2: Draw Toolbar-1

Lecture 15 Create Line

Lecture 16 Absolute Co-ordinate System

Lecture 17 Relative Co-ordinate System

Lecture 18 Polar Co-ordinate System

Lecture 19 Create polyline

Lecture 20 Create Circle

Lecture 21 Create Arc

Lecture 22 Create Rectangle

Lecture 23 Create Polygon

Lecture 24 Create Ellipse

Lecture 25 Create Hatch

Lecture 26 Create Origin in Hatch

Lecture 27 Create Associative in Hatch

Lecture 28 Create Island Detection in Hatch

Lecture 29 Create Separate Hatch

Lecture 30 Create Gradient

Lecture 31 Create Boundary

Lecture 32 Practice Drawing

Section 3: Draw Toolbar-2

Lecture 33 Create spline

Lecture 34 Create Construction Line

Lecture 35 Create Ray

Lecture 36 Create Points and Change Point Type

Lecture 37 Create Divide

Lecture 38 Create measure

Lecture 39 Create wipeout

Lecture 40 Create Donut

Lecture 41 Create Revision Clouds & REVCLOUDARCVARIANCE

Lecture 42 Practice drawing

Section 4: Modify Toolbar-1

Lecture 43 Move

Lecture 44 Copy

Lecture 45 Stretch

Lecture 46 Rotate

Lecture 47 Mirror

Lecture 48 Scale

Lecture 49 Trim in AutoCAD 2021 and Above Version

Lecture 50 Trim in AutoCAD 2020 and Below Version

Lecture 51 Extend in AutoCAD 2021 and Above Version

Lecture 52 Extend in AutoCAD 2020 and Below Version

Lecture 53 Fillet

Lecture 54 Chamfer

Lecture 55 Blend Curves

Lecture 56 Rectangular Array

Lecture 57 Polar Array

Lecture 58 Path Array

Lecture 59 Erase

Lecture 60 Explode

Lecture 61 Offset

Lecture 62 Practice drawing

Section 5: Modify Toolbar-2

Lecture 63 Lengthen

Lecture 64 Align

Lecture 65 Edit Polyline

Lecture 66 Break

Lecture 67 Join

Lecture 68 Reverse

Lecture 69 Copy Nested Objects

Lecture 70 Delete Duplicate Objects (Overkill)

Lecture 71 Draw Order

Lecture 72 Grips Multifunction

Lecture 73 Practice Drawing

Section 6: Status Bar

Lecture 74 Grid (F7)

Lecture 75 Snap (F9)

Lecture 76 Ortho mode (F8)

Lecture 77 Polar Tracking (F10)

Lecture 78 Dynamic input (F12)

Lecture 79 Object Snap (Osnap-F3)

Lecture 80 More Object Snap (Shift + Right Click)

Lecture 81 Quick Properties

Lecture 82 Selection Cycling

Lecture 83 Coordinates in Status Bar

Lecture 84 Lock User Interface (Lock UI)

Lecture 85 Clean Screen (Ctrl+0)

Lecture 86 Line Weight

Lecture 87 Infer Constraints

Lecture 88 Units in Status Bar

Lecture 89 Practice Drawing

Section 7: Utilities

Lecture 90 Measure Distance, Radius, Angle & Coordinates

Lecture 91 Measure area

Lecture 92 Quick Measure

Lecture 93 Quick Select & Select All

Lecture 94 Quick Calculator

Section 8: Object Properties

Lecture 95 Object Color

Lecture 96 Object Line weight and Transparency

Lecture 97 Object Line Type & Match Properties

Lecture 98 Property Pallet & List

Section 9: Dimensions

Lecture 99 Create Dimension Linear

Lecture 100 Create Dimension Aligned

Lecture 101 Create Dimension Angular

Lecture 102 Create Dimension Arc Length

Lecture 103 Create Dimension Radius

Lecture 104 Create Dimension Diameter

Lecture 105 Create Dimension Jogged

Lecture 106 Create Dimension Ordinate

Lecture 107 Create Dimension Continue

Lecture 108 Create Dimension Baseline

Lecture 109 Modify Dimensions

Lecture 110 Create Multiple Types Of Dimension Using DIM

Lecture 111 Create New Dimension Style

Lecture 112 Modify Dimension Style

Lecture 113 Create Dimension Style Override

Lecture 114 Compare Dimension Style

Lecture 115 Create Primary Units & Alternate Units In Dimension Style

Lecture 116 Create Tolerance Using Various Method

Lecture 117 Break Dimension or Extension Line

Lecture 118 Adjust Space Between Dimension

Lecture 119 Add or Remove Jog line In Dimension

Lecture 120 Add or Remove Inspection Information In Dimension

Lecture 121 Update Dimensions

Lecture 122 Reassociate

Lecture 123 Rotate Dimension Text Angle

Lecture 124 Justifies Dimension Text

Lecture 125 Create Center Mark

Lecture 126 Create Center Line

Lecture 127 Practice Drawing

Section 10: Leader Line

Lecture 128 Create Quick Leader

Lecture 129 Quick Leader Settings

Lecture 130 Create Multileader (MLD)

Lecture 131 Options in Multileader

Lecture 132 Modify Multileader

Lecture 133 Create New Multileader Style

Lecture 134 Create Datum for Feature Control Frame (GD&T)

Lecture 135 Create Feature Control Frame (GD&T)

Lecture 136 Practice Leader

Section 11: Text

Lecture 137 Create & Modify Single Line Text

Lecture 138 Create New Text Style

Lecture 139 Create & Modify Multi Line Text

Lecture 140 Practice Text

Section 12: Tables

Lecture 141 Create & Modify Table (TB)

Lecture 142 Add Symbols in Table

Lecture 143 Export and Import in Table

Lecture 144 Create New Table Styles

Lecture 145 Table Properties

Lecture 146 Practice Table

Section 13: Layers

Lecture 147 Create New Layer in Layer Properties Manager

Lecture 148 Create Layer filters

Lecture 149 Copy Object to New Layer

Lecture 150 Create Layer status

Lecture 151 Create Layer walk

Lecture 152 Create Layer Merge

Lecture 153 Layer Delete (Laydel)

Lecture 154 More Layer tools

Lecture 155 Practice Layer

Section 14: Block

Lecture 156 Create Block

Lecture 157 Modify Block

Lecture 158 Redefine Block & Delete Block

Lecture 159 Insert Block

Lecture 160 Blocks Palette

Lecture 161 Write block

Lecture 162 By Block and By Layer Difference

Lecture 163 Edit Block In Place

Lecture 164 Practice block

Section 15: Attributes in Block

Lecture 165 Create Block with Attribute

Lecture 166 Modify Attributes Text

Lecture 167 Hide Attribute, Retain Attribute Display, Explode Attributes (Burst)

Lecture 168 Create Drawing Sheet & Titile Block Using Attributes

Lecture 169 Block Attribute Manager

Lecture 170 Practice Attributes Block

Section 16: Groups

Lecture 171 Create & Modify Group

Lecture 172 Group Manager

Lecture 173 Practice Group

Section 17: Parametric features

Lecture 174 Introduction to Parametric Constraint

Lecture 175 Infer Constraints

Lecture 176 Delete & Hide Constraint

Lecture 177 Auto constraint

Lecture 178 Geometric constraints

Lecture 179 Dimensional constraints

Lecture 180 Parameters Manager

Lecture 181 Practice Parametric Feature

Section 18: Dynamic blocks

Lecture 182 Dynamic blocks Introduction

Lecture 183 Create & Modify Dynamic Block-1

Lecture 184 Create & Modify Dynamic Block-2

Lecture 185 Polar Parameters & Stretch Action in Dynamic Block

Lecture 186 Point/Rotate Parameter and Move/Rotate Action in Dynamic Block

Lecture 187 Create Dynamic Block Using Constraint

Lecture 188 Create Dynamic Block Using Visibility Parameter

Lecture 189 Create Dynamic Block Using Lookup Parameter

Lecture 190 Create Dynamic Block Using Block Table-1

Lecture 191 Create Dynamic Block Using Block Table-2

Lecture 192 Create Dynamic Block Using Array Action

Lecture 193 Practice Dynamic Block

Section 19: External Reference

Lecture 194 External Reference Introduction

Lecture 195 Attach External Reference DWG File

Lecture 196 Attach External Reference PDF File

Lecture 197 Attach External Reference Image File

Lecture 198 Clip External Reference

Lecture 199 Attach & Overlay Difference

Lecture 200 External Reference Palette

Lecture 201 Compare Feature in External Reference

Lecture 202 Practice External Reference (Xref)

Section 20: Model, Layout, Print and Publish

Lecture 203 Arrange Drawing and Print from Model Space

Lecture 204 Layout or Paper Space Introduction

Lecture 205 Drawing Sheet Size

Lecture 206 Page Setup Manager

Lecture 207 Create View Port

Lecture 208 Create View Port Scale

Lecture 209 Layer Control in Viewport

Lecture 210 Plot From Model space and Layout space

Lecture 211 Create Color Plot Style Table

Lecture 212 Practice Drawing

Section 21: Sheet Set

Lecture 213 Sheet Set Introduction

Lecture 214 Create Views in Model Space

Lecture 215 Create Title Block and Template

Lecture 216 Create Label Block

Lecture 217 Create Callout Block

Lecture 218 Create Sheet Set

Lecture 219 Create New Sheet & Views

Lecture 220 Add Callout Blocks

Lecture 221 Publish in sheet set

Lecture 222 eTransmit sheet set

Section 22: Advanced Tools

Lecture 223 Autodesk Design Review Tool

Lecture 224 DWG Compare tool

Lecture 225 Create Your Own Tool Panel

Lecture 226 Layer Translator

Lecture 227 Create Custom Line Type with Text, Symbol

Lecture 228 Create Custom Line Type with Shape

Lecture 229 Design Center Tool of Autocad

Lecture 230 Tool Palettes

Lecture 231 Purge

Lecture 232 Audit

Lecture 233 Recover AutoCAD Drawings

Lecture 234 Reset Default

Lecture 235 Practice Drawing

Section 23: Express Tool

Lecture 236 Arc Aligned Text

Lecture 237 Modify Text Using Express Tool (Explode Text, Change case etc..)

Lecture 238 Convert to Mtext

Lecture 239 Auto Number

Lecture 240 Enclose in Object

Lecture 241 Remote Text & Text Mask

Lecture 242 Modify Commands Express Tool

Lecture 243 Break Line Symbol

Lecture 244 Super Hatch

Lecture 245 Command Aliases

Section 24: Annotative Objects

Lecture 246 Annotative Object Introduction

Lecture 247 Create Annotative Hatch

Lecture 248 Create Annotative Dimension

Lecture 249 Create Annotative Text

Lecture 250 Create Annotative Multileader

Lecture 251 Create Annotative Block

Section 25: Practice drawing and Projects-1

Lecture 252 Practice Drawing - 1

Lecture 253 Practice Drawing - 2

Lecture 254 Practice Drawing - 3

Lecture 255 Practice Drawing - 4

Lecture 256 Practice Drawing - 5

Lecture 257 Practice Drawing - 6

Lecture 258 Practice Drawing - 7

Lecture 259 Practice Drawing - 8

Lecture 260 Practice Drawing - 9

Lecture 261 Practice Drawing - 10

Section 26: Practice drawing and Projects-2

Lecture 262 Create Floor Plan drawing - Wall

Lecture 263 Create Floor Plan drawing - Add Doors

Lecture 264 Create Floor Plan drawing - Add Window

Lecture 265 Create Floor Plan drawing - Add Furniture Block

Lecture 266 Create Floor Plan drawing - Add Text

Lecture 267 Create Floor Plan drawing - Dimensions

Lecture 268 Create Front Elevation

Section 27: Practice drawing and Projects-3

Lecture 269 Mobile Incoming Call Indicator Circuit Diagram

Section 28: Practice drawing and Projects-4

Lecture 270 Create Elbow Sectional View

Lecture 271 Create Weld Neck Flange

Section 29: Projects-5 (Pressure Vessel)

Lecture 272 Create Pressure Vessel Shell Barrel

Lecture 273 Create Dished End

Lecture 274 Create Saddle Support Side View

Lecture 275 Create Saddle Support Elevation View

Lecture 276 Create Nozzle

Lecture 277 Create Lifting Lug

Section 30: AutoCAD 3D Introduction

Lecture 278 2D to 3D Workspace Switching

Lecture 279 3D Navigation Tool Bar

Lecture 280 View Control

Lecture 281 View Cube

Lecture 282 Visual Style Control

Lecture 283 Full Navigation Wheel

Section 31: Solid Primitive

Lecture 284 Box

Lecture 285 Cylinder

Lecture 286 Cone

Lecture 287 Sphere

Lecture 288 Pyramid

Lecture 289 Wedge

Lecture 290 Torus

Lecture 291 Poly Solid

Section 32: User coordinate system (UCS)

Lecture 292 User coordinate system (UCS)

Lecture 293 Dynamic UCS

Section 33: Solid Modeling

Lecture 294 Extrude

Lecture 295 Loft

Lecture 296 Revolve

Lecture 297 Sweep

Lecture 298 Presspull

Section 34: Boolean Operations

Lecture 299 Union

Lecture 300 Subtract

Lecture 301 Intersect

Section 35: Solid Editing

Lecture 302 Solid History

Lecture 303 Slice

Lecture 304 Interfere

Lecture 305 Extract Edges

Lecture 306 Imprint

Lecture 307 Color Edges

Lecture 308 Copy edge

Lecture 309 Extrude Faces

Lecture 310 Taper Faces

Lecture 311 Move Faces

Lecture 312 Copy Faces

Lecture 313 Offset Faces

Lecture 314 Delete Faces

Lecture 315 Rotate Faces

Lecture 316 Color Faces

Lecture 317 Fillet Edge

Lecture 318 Chamfer Edge

Lecture 319 Shell

Lecture 320 Separate

Lecture 321 Thicken

Lecture 322 3D Mirror

Lecture 323 3D Align

Lecture 324 Array Tool in 3D

Section 36: Gizmo Tool

Lecture 325 Move Gizmo

Lecture 326 Rotate Gizmo

Lecture 327 Scale Gizmo & No Gizmo

Section 37: Section

Lecture 328 Create Section Plane

Lecture 329 Live Section

Lecture 330 Add Jog

Lecture 331 Generate Section

Lecture 332 Flatshot

Section 38: Selection

Lecture 333 Culling

Lecture 334 Filters (Vertex, Edge, Face, etc)

Section 39: Layout for 3D Drawing

Lecture 335 Create 2D Views in Layout Using 3D Model

Lecture 336 Create Sectional View

Lecture 337 Create Detail View

Lecture 338 Add Dimension & Text

Section 40: 3D Practice Project-1

Lecture 339 Create 3D Model

Lecture 340 Create Dimension in 3D Model

Lecture 341 Arrange Drawing Inside Layout

Lecture 342 Add Dimensions, Text & Plot Drawing

Section 41: Model View Port

Lecture 343 Create & Modify Model space viewports

Section 42: Visual Style Edges

Lecture 344 No Edges, Iso Lines & Facet Edges, Hide

Section 43: Visual Style Face Color Mode

Lecture 345 Normal, Monochrome, Tint, Desaturate

Section 44: Face Style

Lecture 346 Realistic face style, Warm cool face style & No face style

Lecture 347 Control X-Ray Effect

Section 45: Lights

Lecture 348 Create Point Light

Lecture 349 Create Spot Light

Lecture 350 Create Distant Light

Lecture 351 Create Web Light

Lecture 352 Shadows

Section 46: Material

Lecture 353 Material Browser Introduction

Lecture 354 Apply Material to 3D Model

Lecture 355 Material Editor

Lecture 356 Materials Textures Editor

Lecture 357 Material Mapping

Lecture 358 Remove Material

Lecture 359 Create Material with Lighting Effect

Lecture 360 Apply Material to 3D Model Using Attach By Layer

Section 47: Camera

Lecture 361 Create Camera

Section 48: Sun Location

Lecture 362 Add Sun Location

Section 49: Render

Lecture 363 Add Render Environment

Lecture 364 Create Render & Save as Image

Section 50: Walkthrough Animation

Lecture 365 Create Walkthrough Animation Video

Section 51: 3D House Practice Project-2

Lecture 366 Create Walls & Floors

Lecture 367 Create Sitout Floor & Steps

Lecture 368 Create 3D Doors

Lecture 369 Create 3D Windows

Lecture 370 Create Elevation work

Section 52: Keyboard Shortcuts

Lecture 371 2D & 3D Keyboard Shortcuts

AutoCAD beginners,AutoCAD advanced learners,AutoCAD Modeler,AutoCAD Detailer,AutoCAD Designer,AutoCAD Draftsman,Civil Draftsman,Civil Engineers,Mechanical Engineers,Design Engineers,Anyone interested in AutoCAD,Anyone interested in Oil & Gas,Anyone interested in Process plant,Anyone interested in Boiler,Anyone interested in Steel Structure,Pre-Engineering Building (PEB) Designer,Cad Operator,Cad Supervisor,Fabricator,Welder,AutoCAD Supervisor,Worker,Architectural Draftsman,Architectural Designer,Civil Designer,Electrical Designer,Electrical Draftsman,Electrical Engineer,Electronic Draftsman,Electronic Designer,Electronic Engineer,Mechanical Engineer,Mechanical Designer,Mechanical Draftsman,Anyone interested in pressure vessel,Anyone interested in pressure parts

Homepage

Код:
https://anonymz.com/?https://www.udemy.com/course/autocad-2d-complete-basic-advanced-level-course/

https://abload.de/img/111createnewdimension1de3r.jpg

Код:
https://nitroflare.com/view/1C1536E38C26CAA/Complete_AutoCAD_2D%263D_BasicAdvanced_Level_Course20162022.part1.rar
https://nitroflare.com/view/B3980503D85DA68/Complete_AutoCAD_2D%263D_BasicAdvanced_Level_Course20162022.part2.rar
https://nitroflare.com/view/7CC11EE4A6E5937/Complete_AutoCAD_2D%263D_BasicAdvanced_Level_Course20162022.part3.rar
https://nitroflare.com/view/C2AAAF5338824AA/Complete_AutoCAD_2D%263D_BasicAdvanced_Level_Course20162022.part4.rar
Код:
https://k2s.cc/file/3f8728498d9e9/Complete_AutoCAD_2D_3D_BasicAdvanced_Level_Course20162022.part1.rar
https://k2s.cc/file/3bb5154d6d1d9/Complete_AutoCAD_2D_3D_BasicAdvanced_Level_Course20162022.part2.rar
https://k2s.cc/file/baf78b7a6098e/Complete_AutoCAD_2D_3D_BasicAdvanced_Level_Course20162022.part3.rar
https://k2s.cc/file/572b3647705ac/Complete_AutoCAD_2D_3D_BasicAdvanced_Level_Course20162022.part4.rar
Код:
https://rapidgator.net/file/d3d2fb7b56089855b6eb809dadc3d97f/Complete_AutoCAD_2D&3D_BasicAdvanced_Level_Course20162022.part1.rar.html
https://rapidgator.net/file/b314122a7936af6b9c4face4ea1063fc/Complete_AutoCAD_2D&3D_BasicAdvanced_Level_Course20162022.part2.rar.html
https://rapidgator.net/file/94c99f23a0d8c86935a4d0a271a630e6/Complete_AutoCAD_2D&3D_BasicAdvanced_Level_Course20162022.part3.rar.html
https://rapidgator.net/file/1896761bc6b8691f759099a1c3c2120d/Complete_AutoCAD_2D&3D_BasicAdvanced_Level_Course20162022.part4.rar.html