19.49 GB | 26min 40s | mp4 | 1280X720 | 16:9
Genre:eLearning |Language:English
Files Included :
1 Introduction.mp4 (9.37 MB)
2 Hello ETAP !.mp4 (17.56 MB)
3 Main toolbar.mp4 (180.73 MB)
4 Project toolbar.mp4 (206.7 MB)
5 Mode toolbar.mp4 (112.94 MB)
6 System & components toolbars.mp4 (177.8 MB)
1 Idea behind ATS controlling system.mp4 (52.1 MB)
2 Build ATS single line diagram.mp4 (106.45 MB)
3 Apply some operations on the SLD.mp4 (166.26 MB)
4 Power grid designing data 1.mp4 (85.61 MB)
5 Power grid designing data 2.mp4 (113.31 MB)
6 2-Winding transformer designing data.mp4 (171.91 MB)
7 Static load & induction motor designing data.mp4 (152.59 MB)
8 Lumped load & cables designing data.mp4 (203.57 MB)
9 Cables derating design.mp4 (185.45 MB)
10 Types of panel systems.mp4 (151.57 MB)
11 Panel system rating design.mp4 (149.9 MB)
12 Panel schedule design.mp4 (161.31 MB)
13 Composite network & 3-D manager toolbar.mp4 (181.96 MB)
1 Building M V singe line diagram.mp4 (136.54 MB)
2 Entering loads and cable designing data.mp4 (197.34 MB)
3 Analyzing the load flow designing parameters.mp4 (247.75 MB)
4 Analyzing & solving load flow output results.mp4 (297.3 MB)
5 Load flow analysis at different loading conditions.mp4 (80.78 MB)
1 Autorun ONOFF load flow analysis.mp4 (239.82 MB)
2 Switching sequence management.mp4 (140.65 MB)
1 Idea behind optimal load flow & economic dispatch.mp4 (162.14 MB)
2 Analyzing optimal load flow results.mp4 (212.49 MB)
1 Idea behind unbalanced load flow analysis.mp4 (161.21 MB)
2 Designing the unbalanced load flow power system.mp4 (105.57 MB)
3 Analyzing the unbalanced load flow output results.mp4 (180.89 MB)
1 Idea behind short circuit analysis.mp4 (114.02 MB)
2 Analyzing symmetrical faults output results.mp4 (134.25 MB)
3 Analyzing study case designing parameters.mp4 (168.84 MB)
4 Analyzing types of unsymmetrical faults.mp4 (158.47 MB)
5 Analyzing SC results graphically.mp4 (103.28 MB)
1 Analyzing study case designing parameters.mp4 (119.21 MB)
2 Analyzing unbalanced SC output results.mp4 (115.51 MB)
1 Solar designing angles.mp4 (73.85 MB)
2 Types of solar radiation.mp4 (72.34 MB)
3 Different technologies of solar system.mp4 (68.6 MB)
4 Grid-tie Vs off-grid solar systems.mp4 (51.15 MB)
5 PV solar panel designing parameters.mp4 (68.56 MB)
6 Types of solar batteries.mp4 (44.73 MB)
7 Designing Grid-tie solar system 1.mp4 (66.61 MB)
8 Designing Grid-tie solar system 2.mp4 (105.23 MB)
1 Types of power stability analysis.mp4 (125.83 MB)
2 Transient stability controlling parameters.mp4 (171.67 MB)
3 Designing the power network.mp4 (186.6 MB)
4 Analyzing the transient stability output parameters.mp4 (138.94 MB)
5 Analyzing the transient stability output graphs.mp4 (124.96 MB)
1 Idea behind overcurrent protection.mp4 (133.59 MB)
2 Current transformer designing parameters.mp4 (216.59 MB)
3 Overcurrent relay designing parameters.mp4 (212.95 MB)
4 Protection system selectivity , reliability , dependability.mp4 (123.01 MB)
5 Time dial setting & coordination parameters.mp4 (130.44 MB)
6 Coordination analysis in start view.mp4 (180.25 MB)
1 Differential relay working principle.mp4 (136.57 MB)
2 Feeder differential protection.mp4 (81.01 MB)
3 Transformer differential protection.mp4 (118.73 MB)
1 Idea behind distance protection.mp4 (165.69 MB)
2 Distance relay designing parameters.mp4 (159.34 MB)
3 Distance relay zone settings.mp4 (166.83 MB)
4 Analyzing distance relay output results.mp4 (232.02 MB)
5 Analyzing quadrilateral zones of protection.mp4 (158.04 MB)
1 Idea behind directional protection.mp4 (109.23 MB)
2 Over current protection & coordination.mp4 (198.42 MB)
3 Directional relay application.mp4 (138.49 MB)
1 OverUnder voltage relay working principe.mp4 (149.97 MB)
2 OverUnder voltage relay application.mp4 (142.25 MB)
1 OverUnder frequency relay working principle.mp4 (176.93 MB)
2 OverUnder frequency relay application.mp4 (162.61 MB)
1 Idea behind grounding system.mp4 (96.75 MB)
2 Grounding system manual designing process.mp4 (49.27 MB)
3 Grounding mat designing parameters.mp4 (112.5 MB)
4 Adjusting grounding system designing parameters.mp4 (127.28 MB)
1 Idea behind motor acceleration process.mp4 (172.31 MB)
2 Motor starting study case.mp4 (177.89 MB)
3 Analyzing motor starting output results.mp4 (162.74 MB)
4 Analyzing motor starting results graphically.mp4 (92.46 MB)
5 Dynamic motor starting analysis.mp4 (160.35 MB)
6 Controlling motor starting with variable frequency drive (VFD control).mp4 (124.87 MB)
1 Motor protection characteristic curves.mp4 (184.79 MB)
2 Motor over load protection.mp4 (195.56 MB)
3 Motor protection devices coordination.mp4 (96.64 MB)
1 Wind turbine generator designing parameters 1.mp4 (139.83 MB)
2 Wind turbine generator designing parameters 2.mp4 (91.28 MB)
3 Wind turbine generator load flow analysis.mp4 (139.97 MB)
1 Idea behind harmonic.mp4 (134.63 MB)
2 Analyzing harmonic results.mp4 (184.3 MB)
3 Harmonic analysis study case.mp4 (189.58 MB)
4 Analyzing harmonic results graphically.mp4 (92.19 MB)
5 Single-tuned harmonic filter.mp4 (190.14 MB)
1 Idea behind arc-flash condition.mp4 (188.43 MB)
2 Arc-flash study case 1.mp4 (147.4 MB)
3 Arc-flash study case 2.mp4 (169.54 MB)
4 Analyzing arc-flash output results.mp4 (81.95 MB)
1 Idea behind power factor correction.mp4 (171.65 MB)
2 Power factor designing parameters.mp4 (171.48 MB)
3 Analyzing power factor correction results.mp4 (120.45 MB)
1 Idea behind contingency analysis.mp4 (159.68 MB)
2 Designing the power network.mp4 (198.23 MB)
3 Contingency analysis with autorun ONOFF load flow.mp4 (140.12 MB)
4 Single and double contingency analysis.mp4 (239.27 MB)
1 Conduits designing parameters.mp4 (118.24 MB)
2 Analyzing pulling tension parameters.mp4 (54.92 MB)
1 Types of raceway systems.mp4 (159.73 MB)
2 Raceway steady state analysis.mp4 (216.33 MB)
3 Uniform current ampacity analysis.mp4 (258.21 MB)
4 Transient CurrentTemperature analysis.mp4 (111.07 MB)
1 Building DC system network.mp4 (162.03 MB)
2 DC elements designing parameters 1.mp4 (167.95 MB)
3 DC elements designing parameters 2.mp4 (113.7 MB)
4 DC load flow analysis.mp4 (163.36 MB)
1 DC short circuit analysis.mp4 (125.46 MB)
1 Study case designing parameters.mp4 (110.53 MB)
2 Analyzing arc flash output results.mp4 (207.36 MB)
1 Batteries demand load design.mp4 (126.27 MB)
2 Batteries study case design 1.mp4 (140.77 MB)
3 Batteries study case design 2.mp4 (122.43 MB)
4 Batteries sizing and capacity.mp4 (151.12 MB)
1 Concept behind phase sequence.mp4 (38.77 MB)
2 Motor direction control.mp4 (43.81 MB)
3 Designing the DC forward reverse controlling circuit.mp4 (226.3 MB)
4 DC controlling circuit voltage drop.mp4 (66.27 MB)]
Screenshot
DDownload
https://ddownload.com/bbwb82vijgqa https://ddownload.com/jxjo4311by2j https://ddownload.com/nkh2tcrkfuhj https://ddownload.com/yg7zp2as402i https://ddownload.com/w48yezebmp3j https://ddownload.com/o6nh5x1g4c1n https://ddownload.com/r7gm02whv9vk https://ddownload.com/yiigdco6am0a https://ddownload.com/0k74thtiziky https://ddownload.com/r2j4rtaa627m https://ddownload.com/mai8u7sg7hqu https://ddownload.com/b2zicw911yl9 https://ddownload.com/8g2zkxmrf2a6 https://ddownload.com/yk9b3ew5unma https://ddownload.com/reh8eu2othwp https://ddownload.com/gr8q5cbrl5qb https://ddownload.com/7c5mb3md40v7 https://ddownload.com/qe0z2rbq84k3
