Altium Concord Pro 2020 version 2.0.6.16 | 1.6 Gb
The Altium development team is pleased to announce the availability of Altium Concord Pro 2020 version 2.0.6 buld 16. This solutions  automates organizing, storing, sharing, and maintaining up-to-date electronic component information providing a single source for all component information directly in your design environment.

PLM Integration & CVS Loading
1125    Introduce component synchronization mode to update existing components and not create new components.
2531    The naming schema from the Component Template is now prioritized over the naming schema for the folder when creating a new item by component synchronization process..
2586    Set of improvements and bug fixes in component synchronization.
2587    Extend component synchronization with option to create part choices based on component properties.
2588    Improve part choice support in component synchronization.
3050    Fix issue with connecting to Arena.
3091    Improve component template handling in component sync process.
3543    Improve component synchronization with Arena for incomplete part choice data on Arena side.
4278    Component synchronization annotates component creation and change with a release note.
4720    Ensure PLM integration works with PTC Windchill REST 1.5 and 1.6 versions.
7548    CSV load was failing when loading data to folders with a high number of item revisions.
9440    Improve component synchronization with PTC Windchill classification support (Parts Link module).
10053   Enable support for component sync working with working revision(s) on Arena PLM side.
10054   Fix issue with wrong format of revision number created for component sync operation.
Project Web View
2825    Improved quality of schematic in web project view.
3063    Fix issue with BOM web view generation when non-managed components are used in project.
3186    Fix issue with system trying to generate web view for non-PCB projects.
3252    Improvements and bug fixes in project web view generation.
3254    Improvements and bug fixes in project web view generation.
3352    Improvements and bug fixes in project web view generation.
3364    Fix issue with web browser running out of memory when switching large documents in project web view.
3717    Improve quality of web view for images embedded in schematic.
3813    Fix issues with generating web view for large projects.
4151    Fix issue with wrong parameters visible for components with multiple footprints in web project view.
4353    Fix issue with generating web view data for project released outputs.
4414    Improve non-ASCII characters handling in web ui.
4427    Fix issue with generating web view for some projects.
4523    Resolved an issue with project web view generation failure.
5716    Fixed: Issue with cloned projects still using original projects folder as a target for Project Releaser generated items.
Library & Components
2572    Propagate release note to components updated due to referenced model(s) change.
2797    Fix issue with displaying components view in Explorer for large component count folders.
3353    Fix issue when min / max values were not visible in components panel range search.
4554    Fixed issue with non-ASCII characters in the component models.
6497    Fixed: Issue with Batch Editor not populating existing component parameters when updating related components after component template modification.
6550    Component Data Loss.
Infrastructure & Administration
1862    Improve search index building process.
2128    Fix bug with lifecycle definition creation/editing in web ui.
2516    Fix issue with simultaneous email notifications sending to large number of recipients.
2623    Improved internal storage (new version of db engine).
2686    Include MCAD Co-Designer options for component recognition capability.
2941    Fix issue with lifecycle colours created with web interface.
2952    Improve performance of operations on large folders.
2965    Improve search index building process.
3246    Sample data set updates and bug-fixes.
3375    Improve search index rebuild process.
3397    Fix issue with resolving project sharing issues in health monitor.
3676    Sample data improvements and bug fixes.
3771    Fix issue with email notifications sending on non default ports.
3897    Fixed issues in the lifecycle editor in the web UI.
3977    Fix issue with health monitor showing false errors after installation.
4014    Fix issue with lack of 'Mechatronic 3D Models' folder in new databases.
4145    Fix issue with licence check in health monitor.
4282    Sample data updates.
4332    Fixed issues in the lifecycle editor in the web UI.
4439    Fix issue with health monitor reporting search index error for databases with very large folders.
4552    Fix issue with installation when non US format is set-up in OS settings.
5481    Added: New server settings for supporting the placement of component models from a data management system on MCAD side done by Altium CoDesigner.
5756    Added: A predefined option related to the Altium CoDesigner's component recognition mechanism. It allows to recognize components by the Model Name.
6601    Fixed: The server responded to Altium CoDesigner with the error about an inability to read the settings UseNativeMCADModels and ComponentRecognitionType due to insufficient privileges when connected by non-admin user.
7670    Issue with the restoration of a backup to a server instance that already stored projects.
10051   Fix issue with lifecycle of component not being reset for new component revision when related CAD model is modified.
Other
711     Resolve issue with UI after new part source was configured in web ui.
3132    Fix issue with date handling in managed flows when comma is selected as decimal separator.
3471    Fix issue with 'show only latest' option in Explorer view for some databases upgraded from Vault 3.x.
3779    Name and description updated in project releaser is propagated to item revision.
4231    Fix issue with case sensitive parameter matching in item manager.
6254    Communication to port 389 (LDAP) in an un-encrypted way, unexpected URL.   

A distinct on-site, server-based design solution, Altium Concord Pro    works in harmony with Altium Designer to provide an elegant answer to the question of handling design data with secured integrity. Altium Concord Pro not only provides rock-solid, secure storage of data, but also enables re-release of data as distinctly separate revisions - essentially tracking design changes over time, without overwriting any previously released data. It also caters for the lifecycle of the data to be managed, allowing people that need to use the data to see, at-a-glance, what stage the data has reached in its 'life' and therefore what it can be safely used for.

Altium Concord Pro is used to store and manage components, domain models, schematic sheets of circuitry and design templates. Indeed, you can even create and manage your entire design projects directly within the Server, with the additional benefit of collaboration support, meaning an entire team can work concurrently on the same board design - even annotating the design with comments.

By furnishing a set of reusable design 'building blocks' within Altium Concord Pro, you can embark on fresh projects safe in the knowledge that each model, component, and higher-order design element has been ratified and approved for use, with no having to reinvent the wheel as it were. The Server becomes both the source and destination of design elements, with each new design utilizing elements released to, and managed through, the Server. And by designing only with elements from Altium Concord Pro, the integrity of those designs is inherently assured.

And Altium Concord Pro facilitates bi-directional design collaboration with various supported mechanical design platforms. This enables you to keep MCAD and ECAD design teams on the same page by sharing changes to board shape, component placement, and mounting holes, and intelligently link together 3D component bodies with your electrical component data - creating a unified component model that accurately reflects design intent from the respective domains.

Getting Started in Altium Concord Pro - Watson

Altium LLC.     is a multinational software corporation headquartered in San Diego, California, that focuses on electronics design systems for 3D PCB design and embedded system development. Altium products are found everywhere from world leading electronic design teams to the grassroots electronic design community. Founded in 1985, Altium has offices worldwide, with US locations in San Diego, Boston and                                                                                                                                                                                                        New York City, European locations in Karlsruhe, Amersfoort, Kiev, Munich, Markelo and Zug, and Asia Pacific locations in Shanghai, Tokyo and Sydney.

Product:    Altium Concord Pro
Version:    2020 version 2.0.6 buld 16 *
Supported Architectures: x64
Website Home Page :

https://www.altium.com]www.altium.com

Language: english
System Requirements: PC **
Size: 1.6 Gb

- Altium Concord Pro 2.0.6 buld 16.exe

MCAD_plugins
- AltiumCoDesignerCREO_2.1.0.10
- AltiumCoDesignerInventor_2.1.0.6
- AltiumCoDesignerSOLIDWORKS_2.1.0.7   

Altium Concord Pro can be installed on a PC running one of the following Operating Systems:

- Windows Server 2016 Standard Edition (64-bit)
- Windows Server 2012 R2 (64-bit)
- Windows 10 (64-bit)
- Windows 8.1 (64-bit)
- Windows 8 (64-bit)

Recommended System Requirements

The following are the recommended system requirements to install and run Altium Concord Pro. Note that these recommendations are for 5 concurrent users.

    OS: Windows Server 2016 Standard Edition (64-bit)
    RAM: 16GB+
    Processor: Intel Xeon processor or equivalent (4 or more cores)
    Disk space: 200GB

Minimum System Requirements

The following are the minimum system requirements to install and run Altium Concord Pro. Note that these recommendations are for 5 concurrent users.

    OS: Windows Server 2012 R2 (64-bit)
    RAM: 8GB+
    Processor: Intel Core i3/i5 processor or equivalent (2 or more cores)
    Disk space: 200GB

The following MCAD platforms and versions are currently supported:
- Dassault Systemes SOLIDWORKS - version 2018, 2019, 2020, 2021
- Autodesk Inventor Professional - version 2019, 2020, 2021
- PTC Creo Parametric - 4.x, 5.x, 6.x, 7.x

download скачать link:

https://rapidgator.net/file/00a64594fe9dab52c346ec1b3b1231d2/464fa.Altium.Concord.Pro.2020.version.2.0.6.16.part1.rar.html
https://rapidgator.net/file/b97225acd5782c30b1433cef9fd338fb/464fa.Altium.Concord.Pro.2020.version.2.0.6.16.part2.rar.html
https://rapidgator.net/file/3062b1ff4d2aae00642d4a35a994c7ff/464fa.Altium.Concord.Pro.2020.version.2.0.6.16.part3.rar.html
https://rapidgator.net/file/74b7772cb180c4656b2de1c8d30b9e27/464fa.Altium.Concord.Pro.2020.version.2.0.6.16.part4.rar.html
https://rapidgator.net/file/221904c8d85c58f30813b5a868dfea71/464fa.Altium.Concord.Pro.2020.version.2.0.6.16.part5.rar.html


https://nitroflare.com/view/F7F201C9F0E06A7/464fa.Altium.Concord.Pro.2020.version.2.0.6.16.part1.rar
https://nitroflare.com/view/980CBBE50BC05ED/464fa.Altium.Concord.Pro.2020.version.2.0.6.16.part2.rar
https://nitroflare.com/view/E1179186ACF5917/464fa.Altium.Concord.Pro.2020.version.2.0.6.16.part3.rar
https://nitroflare.com/view/ED7CB8148156FE8/464fa.Altium.Concord.Pro.2020.version.2.0.6.16.part4.rar
https://nitroflare.com/view/49AC5557D3F9D57/464fa.Altium.Concord.Pro.2020.version.2.0.6.16.part5.rar


https://uploadgig.com/file/download скачать/DaCB26cafd360277/464fa.Altium.Concord.Pro.2020.version.2.0.6.16.part1.rar
https://uploadgig.com/file/download скачать/18e9AfD9778daDfa/464fa.Altium.Concord.Pro.2020.version.2.0.6.16.part2.rar
https://uploadgig.com/file/download скачать/c94bA8A5b98aA82B/464fa.Altium.Concord.Pro.2020.version.2.0.6.16.part3.rar
https://uploadgig.com/file/download скачать/171a7a6dd3FC28ed/464fa.Altium.Concord.Pro.2020.version.2.0.6.16.part4.rar
https://uploadgig.com/file/download скачать/32B5C58A889b8a52/464fa.Altium.Concord.Pro.2020.version.2.0.6.16.part5.rar

Links are Interchangeable - No Password - Single Extraction